View 195D107X0004Z4T_3789237.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40001 110 revision: 02-jul-07 195d vishay sprague solid tantalum chip capacitors t antamount ? conformal coated features ? 8 mm, 12 mm tape packaging to eia-481-1 reeling per iec 286-3. 7? (178 mm) standard 13 " (330 mm) available ? us and european case sizes available capacitance range: 0.1 f to 330 f capacitance tolerance: 10 %, 20 % standard voltage rating: 2 wvdc to 50 wvdc performance characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) note: refer to doc 40088 ordering information 195d 106 x0 004 s 2 t type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an "r" (6r3 = 6.3 v). see ratings and case codes table style 2 is standard 2 = 100 % tin 4 = gold plated 8 = solder plated (60/40) special order t = tape and reel 7" [178 mm] reel standard 1/2" reel minimum 13" [330] reel available excluding the "r" case, on request. see tape and reel specifications. dimensions in inches [millimeters] case code eia size l (max.) w h a b d (ref.) j (max.) c n / a 0.087 [2.21] 0.045 0.010 [1.14 0.25] 0.045 0.010 [1.14 0.25] 0.016 0.008 [0.40 0.20] 0.042 0.010 [1.07 0.25] 0.063 [1.60] 0.004 [0.10] r 7257 0.283 [7.2] 0.235 0.012 [6.0 0.3] 0.136 0.012 [3.5 0.3] 0.051 0.012 [1.3 0.3] 0.180 0.025 [4.6 0.6] 0.243 [6.20] 0.004 [0.10] s 3518 0.143 [3.63] 0.072 0.008 [1.83 0.20] 0.048 0.008 [1.22 0.20] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] 0.115 [2.90] 0.004 [0.10] v 3527 0.143 [3.63] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.30 0.25] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] 0.115 [2.90] 0.004 [0.10] x 7227 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.30 0.25] 0.040 0.020 [1.00 0.50] 0.200 0.027 [5.08 0.69] 0.243 [6.20] 0.004 [0.10] y 7227 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.069 0.010 [1.75 0.25] 0.040 0.020 [1.00 0.50] 0.200 0.027 [5.08 0.69] 0.243 [6.20] 0.004 [0.10] z 7227 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.104 0.010 [2.65 0.25] 0.040 0.020 [1.00 0.50] 0.200 0.023 [5.08 0.59] 0.243 [6.20] 0.004 [0.10] note: the anode termination (d less b) will be a minimum of 0.010 (0.25), c case = 0.005 (0.131) minimum a v aila b le p b -free rohs * compliant tantalum wire nib identifies anode (+) terminal l a b d j j h w note: preferred tolerance and r eel sizes are in bold. we reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. voltage substitutions will be marked with the higher voltage rating. * pb containing terminations are not rohs compliant, exemptions may apply
document number: 40001 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-jul-07 111 195d solid tantalum chip capacitors t antamount ? conformal coated vishay sprague ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 0.10 c 0.15 c 0.22 c/s 0.33 c s 0.47 c s v 0.68 cssv 1.0 scsssx 1.5 csssvx 2.2 csssvxy 3.3csssvxyz 4.7sssvxxzz 6.8ssvxxyzr 10svxxyyzr 15vxxyzzr 22xxyy/zzrr 33 x y z z r r 47 y y z r r 68 y z r r 100 z z r 120 r r r 150 r r r 180 r r 220 r r 330 r standard ratings capacitance (f) case code part number* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 4 wvdc at + 85 c, surge = 5 v . . . 2.7 wvdc at + 125 c, surge = 3.4 v 3.3 c 195d335x_004c2t 0.5 6 4.7 s 195d475x_004s2t 0.5 6 6.8 s 195d685x_004s2t 0.5 6 10 s 195d106x_004s2t 0.5 6 15 v 195d156x_004v2t 0.6 6 22 x 195d226x_004x2t 0.9 6 33 x 195d336x_004x2t 1.3 6 47 y 195d476x_004y2t 1.9 6 68 y 195d686x_004y2t 2.7 6 100 z 195d107x_004z2t 4.0 8 120 r 195d127x_004r2t 4.8 8 150 r 195d157x_004r2t 6.0 8 180 r 195d187x_004r2t 7.2 8 220 r 195d227x_004r2t 8.8 8 330 r 195d337x_004r2t 13.2 8 * for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
195d vishay sprague solid tantalum ch ip capacitors t antamount ? conformal coated www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40001 112 revision: 02-jul-07 standard ratings capacitance (f) case code part number* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 6.3 wvdc at + 85 c, surge = 8 v . . . 4 wvdc at + 125 c, surge = 5 v 2.2 c 195d225x_6r3c2t 0.5 6 3.3 s 195d335x_6r3s2t 0.5 6 4.7 s 195d475x_6r3s2t 0.5 6 6.8 s 195d685x_6r3s2t 0.5 6 10 v 195d106x_6r3v2t 0.6 6 15 x 195d156x_6r3x2t 0.9 6 22 x 195d226x_6r3x2t 1.3 6 33 y 195d336x_6r3y2t 2.0 6 47 y 195d476x_6r3y2t 2.8 6 68 z 195d686x_6r3z2t 4.1 6 100 z 195d107x_6r3z2t 6.0 8 120 r 195d127x_6r3r2t 7.2 8 150 r 195d157x_6r3r2t 9.0 8 180 r 195d187x_6r3r2t 10.8 8 220 r 195d227x_6r3r2t 13.2 8 10 wvdc at + 85 c, surge = 13v . . . 7 wvdc at + 125 c, surge = 9 v 1 s 195d105x_010s2t 0.4 6 1.5 c 195d155x_010c2t 0.5 6 2.2 s 195d225x_010s2t 0.5 6 3.3 s 195d335x_010s2t 0.5 6 4.7 s 195d475x_010s2t 0.5 6 6.8 v 195d685x_010v2t 0.7 6 10 x 195d106x_010x2t 1.0 6 15 x 195d156x_010x2t 1.5 6 22 y 195d226x_010y2t 2.2 6 33 z 195d336x_010z2t 3.0 6 47 z 195d476x_010z2t 4.7 6 68 r 195d686x_010r2t 6.8 6 100 r 195d107x_010r2t 10 8 120 r 195d127x_010r2t 12 8 150 r 195d157x_010r2t 15 8 16 wvdc at + 85 c, surge = 20 v . . . 10 wvdc at + 125 c, surge = 12 v 1.0 c 195d105x_016c2t 0.5 4 1.5 s 195d155x_016s2t 0.5 6 2.2 s 195d225x_016s2t 0.5 6 3.3 s 195d335x_016s2t 0.5 6 4.7 v 195d475x_016v2t 0.7 6 6.8 x 195d685x_016x2t 1.0 6 10 x 195d106x_016x2t 1.5 6 15 y 195d156x_016y2t 2.3 6 22 y 195d226x_016y2t 3.2 6 22 z 195d226x_016z2t 3.3 6 33 z 195d336x_016z2t 5.0 6 47 r 195d476x_016r2t 7.1 6 68 r 195d686x_016r2t 10.2 6 for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
document number: 40001 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-jul-07 113 195d solid tantalum chip capacitors t antamount ? conformal coated vishay sprague standard ratings capacitance (f) case code part number* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 20 wvdc at + 85 c, surge = 26 v . . . 13 wvdc at + 125 c, surge = 16 v 0.68 c 195d684x_020c2t 0.5 4 1.0 s 195d105x_020s2t 0.5 4 1.5 s 195d155x_020s2t 0.5 6 2.2 s 195d225x_020s2t 0.5 6 3.3 v 195d335x_020v2t 0.7 6 4.7 x 195d475x_020x2t 0.9 6 6.8 x 195d685x_020x2t 1.4 6 10 y 195d106x_020y2t 2.0 6 15 z 195d156x_020z2t 3.0 6 22 z 195d226x_020z2t 4.4 6 33 r 195d336x_020r2t 6.6 6 47 r 195d476x_020r2t 9.4 6 25 wvdc at + 85 c, surge = 32 v . . . 17 wvdc at + 125 c, surge = 20 v 0.47 c 195d474x_025c2t 0.5 4 0.68 s 195d684x_025s2t 0.5 4 1.0 s 195d105x_025s2t 0.5 4 1.5 s 195d155x_025s2t 0.5 6 2.2 v 195d225x_025v2t 0.6 6 3.3 x 195d335x_025x2t 0.8 6 4.7 x 195d475x_025x2t 1.2 6 6.8 y 195d685x_025y2t 1.7 6 10 y 195d106x_025y2t 2.5 6 15 z 195d156x_025z2t 3.8 6 22 r 195d226x_025r2t 5.5 6 33 r 195d336x_025r2t 8.3 6 35 wvdc at + 85 c, surge = 46 v . . . 23 wvdc at + 125 c, surge = 28 v 0.33 c 195d334x_035c2t 0.5 4 0.47 s 195d474x_035s2t 0.5 4 0.68 s 195d684x_035s2t 0.5 4 1.0 s 195d105x_035s2t 0.5 4 1.5 v 195d155x_035v2t 0.5 6 2.2 x 195d225x_035x2t 0.8 6 3.3 y 195d335x_035y2t 1.2 6 4.7 z 195d475x_035z2t 1.6 6 6.8 z 195d685x_035z2t 2.4 6 10 z 195d106x_035z2t 3.5 6 15 r 195d156x_035r2t 5.3 6 22 r 195d226x_035r2t 7.7 6 for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
195d vishay sprague solid tantalum chip capacitors t antamount ? conformal coated www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40001 114 revision: 02-jul-07 standard ratings capacitance (f) case code part number* max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 50 wvdc at + 85 c, surge = 65 v . . . 33 wvdc at + 125 c, surge = 38 v 0.1 c 195d104x_050c2t 0.5 4 0.15 c 195d154x_050c2t 0.5 4 0.22 c 195d224x_050c2t 0.5 4 0.22 s 195d224x_050s2t 0.4 4 0.33 s 195d334x_050s2t 0.5 4 0.47 v 195d474x_050v2t 0.5 4 0.68 v 195d684x_050v2t 0.5 4 1.0 x 195d105x_050x2t 0.5 4 1.5 x 195d155x_050x2t 0.8 6 2.2 y 195d225x_050y2t 1.1 6 3.3 z 195d335x_050z2t 1.7 6 4.7 z 195d475x_050z2t 2.4 6 6.8 r 195d685x_050r2t 3.4 6 10 r 195d106x_050r2t 5.0 6 for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?. typical curves at + 25 c, impedance and esr vs. frequency 100 10 1 0.1 ohms frequency in hz 100m 10m 1m 100k 10k 1k "s" case 4.7 f - 10 vdc 1 f - 35 vdc impedance esr 100 10 1 0.1 ohms frequency in hz 100m 10m 1m 100k 10k 1k "v" case 15 f - 4 vdc 0.47 f - 50 vdc impedance esr
document number: 40001 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-jul-07 115 195d solid tantalum chip capacitors t antamount ? conformal coated vishay sprague typical curves at + 25 c, impedance and esr vs. frequency 1000 100 10 1 0.01 0.1 ohms frequency in hz 100 10m 1m 100k 10k 1k "x" case 10 f - 16 vdc 6.8 f - 20 vdc impedance esr 100 10 1 0.01 0.1 ohms frequency in hz 100 10m 1m 100k 10k 1k "y" case 47 f - 6.3 vdc 22 f - 10 vdc impedance esr 100 10 1 0.01 0.1 ohms frequency in hz 100 10m 1m 100k 10k 1k "z" case 100 f - 6.3 vdc 4.7 f - 50 vdc impedance esr
195d vishay sprague solid tantalum ch ip capacitors t antamount ? conformal coated www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40001 116 revision: 02-jul-07 ordering information - european use only 195d 106 x0 004 d 2 t type capacitance capacitance tolerance dc voltage rating at + 85 c case code termination packaging this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an "r" (6r3 = 6.3 v). see ratings and case codes table style 2 is standard 2 = solderable coating 4 = gold plated 8 = solder plated (60/40) special order t = tape and reel 180 mm reel standard see tape and reel specifications. dimensions in millimeters case code l 0.3 w 0.3 h (max) a 0.3 b 0.3 c (min) a 2.8* 0.2 1.5 1.4 0.7 1.6 0.3 b 4.2* 0.2 1.4 1.6 0.8 2.5 0.3 d 4.2* 0.2 2.1 1.6 0.8 2.5 0.5 e 5.5 2.1 1.7 1.0 3.2 0.8 f 5.0 3.3 2.0 1.0 3.6 0.8 g 7.0 2.6 2.8 1.0 4.5 0.8 h 7.8 3.7 3.0 1.0 5.0 0.8 * 0.2 note: the anode termination (d less b) will be a minimum of 0.010 (0.25), c case = 0.005 (0.131) minimum w l a b d c j j h tantalum wire nib identifies anode (+) terminal note: preferred tolerance and reel sizes are in bold. we reserve the right to supply higher voltage ratings and tighter capacitance tolerance c apacitors in the same case size. volta ge substitutions will be marked with the higher voltage rating.
document number: 40001 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-jul-07 117 195d solid tantalum chip capacitors t antamount ? conformal coated vishay sprague 195d standard range, ratings and case codes f 2 v 4 v 6.3 v 10 v 15 v 20 v 25 v 35 v/40 v 50 v 0.10 aa 0.15 aa 0.22 ab 0.33 abb 0.47 a a b d 0.68 a b d d 1.0 abb de 1.5 a b d e f 2.2 a b d e f f 3.3 a b d e f g 4.7 a b d e f g h 6.8 a d e f g h 10 a d e f g 15 e f g h 22 f g h 33 f g h 47 g h 68 g h 100 h h standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 2 wvdc at + 85 c, surge = 2.6 v . . . 1.2 wvdc at + 125 c, surge = 1.6 v 3.3 a 195d335x_002a2t 0.5 8 4.7 a 195d475x_002a2t 0.5 8 6.8 a 195d685x_002a2t 0.5 8 10 a 195d106x_002a2t 0.6 8 4 wvdc at + 85 c, surge = 5 v . . . 2.7 wvdc at + 125 c, surge = 3.4 v 2.2 a 195d225x_004a2t 0.5 8 4.7 b 195d475x_004b2t 0.5 8 10 d 195d106x_004d2t 0.5 8 15 e 195d156x_004e2t 0.6 8 33 f 195d336x_004f2t 1.3 8 68 g 195d686x_004g2t 2.7 8 100 h 195d107x_004h2t 4.0 8 6.3 wvdc at + 85 c, surge = 8 v . . . 4 wvdc at + 125 c, surge = 5 v 1.5 a 195d155x_6r3a2t 0.5 8 3.3 b 195d335x_6r3b2t 0.5 8 6.8 d 195d685x_6r3d2t 0.5 8 10 e 195d106x_6r3e2t 0.6 8 22 f 195d226x_6r3f2t 1.3 8 47 g 195d476x_6r3g2t 2.8 8 68 h 195d686x_6r3h2t 4.1 8 * for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
195d vishay sprague solid tantalum chip capacitors t antamount ? conformal coated www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40001 118 revision: 02-jul-07 standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 10 wvdc at + 85 c, surge = 13 v . . . 7 wvdc at + 125 c, surge = 9 v 1.0 a 195d105x_010a2t 0.5 6 2.2 b 195d225x_010b2t 0.5 6 4.7 d 195d475x_010d2t 0.5 6 6.8 e 195d685x_010e2t 0.7 6 15 f 195d156x_010f2t 1.5 6 47 h 195d476x_010h2t 4.7 6 100 h 195d107x_010h2t 8.0 7 15/16 wvdc at + 85 c, surge = 20 v...10 wvdc at + 125 c, surge = 12 v 0.47 a 195d474x_015a2t 0.5 6 0.68 a 195d684x_015a2t 0.5 6 1.0 b 195d105x_015b2t 0.5 6 1.5 b 195d155x_015b2t 0.5 6 3.3 d 195d335x_015d2t 0.5 6 4.7 e 195d475x_015e2t 0.7 6 10 f 195d106x_015f2t 1.5 6 22 g 195d226x_015g2t 3.3 6 33 h 195d336x_015h2t 5.0 6 20 wvdc at + 85 c, surge = 26 v . . . 13 wvdc at + 125 c, surge = 16 v 0.47 a 195d474x_020a2t 0.5 6 1.0 b 195d105x_020b2t 0.5 6 2.2 d 195d225x_020d2t 0.5 6 3.3 e 195d335x_020e2t 0.7 6 6.8 f 195d685x_020f2t 1.4 6 15 g 195d156x_020g2t 3.0 6 22 h 195d226x_020h2t 4.4 6 25 wvdc at + 85 c, surge = 32 v . . . 17 wvdc at + 125 c, surge = 20 v 0.33 a 195d334x_025a2t 0.5 6 0.68 b 195d684x_025b2t 0.5 6 1.5 d 195d155x_025d2t 0.5 6 2.2 e 195d225x_025e2t 0.6 6 4.7 f 195d475x_025f2t 1.2 6 6.8 g 195d685x_025g2t 1.7 6 10 g 195d106x_025g2t 2.5 6 15 h 195d156x_025h2t 3.8 6 * for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
document number: 40001 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 02-jul-07 119 195d solid tantalum chip capacitors t antamount ? conformal coated vishay sprague standard ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) 35/40 wvdc at + 85 c, surge = 46 / 52 v. . . 23 / 25 wvdc at + 125 c, surge = 28 / 30 v 0.10 a 195d104x_035a2t 0.5 6 0.15 a 195d154x_035a2t 0.5 6 0.22 a 195d224x_035a2t 0.5 6 0.33 b 195d334x_035b2t 0.5 6 0.47 b 195d474x_035b2t 0.5 6 0.68 d 195d684x_035d2t 0.5 6 1.0 d 195d105x_035d2t 0.5 6 1.5 e 195d155x_035e2t 0.5 6 2.2 f 195d225x_035f2t 0.8 6 3.3 f 195d335x_035f2t 1.2 6 4.7 g 195d475x_035g2t 1.6 6 6.8 h 195d685x_035h2t 2.4 6 50 wvdc at + 85 c, surge = 65 v . . . 33 wvdc at + 125 c, surge = 38 v 0.10 a 195d104x_050a2t 0.5 6 0.15 a 195d154x_050a2t 0.5 6 0.22 b 195d224x_050b2t 0.5 6 0.33 b 195d334x_050b2t 0.5 6 0.47 d 195d474x_050d2t 0.5 6 0.68 d 195d684x_050d2t 0.5 6 1.0 e 195d105x_050e2t 0.5 6 1.5 f 195d155x_050f2t 0.8 6 2.2 f 195d225x_050f2t 1.1 6 3.3 g 195d335x_050g2t 1.7 6 4.7 h 195d475x_050h2t 2.4 6 * for 10 % tolerance, specify ?9?: for 20 % tolerance, change to ?0?.
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.

▲Up To Search▲

Price & Availability of 195D107X0004Z4T

	To Download 195D107X0004Z4T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .